The measurements show the diameter of the dial, including the bezel, from (A) to (B). When measuring for an opening, remember that there is about 1/4″ between the nail holes in the dial and the outer edge of the bezel ring.
Once you have the measurements for the clock case opening (C), it is time to order!
We recommend that you order a dial about 1/2″ larger than the clock case opening. This will keep the dial from sliding into the hole and also allow sufficient material to attach the dial to your clock case.
Still have questions? Please contact our U.S. based support staff by Submitting a Request. If you already have an open ticket with a Support Agent, please reply to the last email sent.