We at Klockit would be happy to help you find the correct new or replacement movement for your project!
If you are replacing a movement, please be sure to remove the movement completely out of the clock. This is to ensure we get the most accurate measurements from the current movement.
Are you ready to do some measuring?
Note the following, using the image below as a guide:
1. Please measure the length of the threaded portion on the current movement. For new movements, measure the total thickness of the material the shaft will have to pass through including the dial and the support board.
2. Length of the hand shaft on the movement
3. Dimensions of movement
To know what size hands to select to include with your movement:
1. Measure the length of the minute hand from the center mount hole to the tip - note, this is the longer of the two hands
Once you have your measurements, see our selection of Quartex® movements here:https://www.klockit.com/all-departments/quartz-clock-movements.html
If you require a chiming movement, see our selection of chiming movements here: https://www.klockit.com/all-departments/quartz-clock-movements/chiming.html
If you require a pendulum movement, see our selection of pendulum movements here: https://www.klockit.com/all-departments/quartz-clock-movements/pendulum.html
If you still need assistance, please contact our U.S.-based support staff by Submitting a Request or through our live chat during business hours. If you already have an open ticket with a Support Agent, please reply to the last email sent.